Please email us at info@irrigation.org.au if you would like to be added to the forum and you can then make a post and be notified when new posts are made. Due to the many spam registrations received we have elected to have a manual system to ensure only CMIs/DQPs are members of the forum.
Topics: 0 | Posts: 0
Forum is empty
Rules and guidance for the use and regulation of non-urban water meters
Topics: 1 | Posts: 1By Irrigation Australia, 5 days ago
If the information you require is not listed in the categories below then please ask your question/comment here and Irrigation Australia will find the expert response
Topics: 2 | Posts: 4By Irrigation Australia, 6 months ago
Interested in becoming qualified to install and validate non-urban water meters in Australia then follow these three steps:
Topics: 3 | Posts: 3By Irrigation Australia, 8 months ago
The Governance Officer - Metering position resulted from a funding agreement between the Murray Darling Basin Authority (MDBA) on behalf of basin and non-basin jurisdictions and Irrigation Australia. Read more here about the Governance Officer - Metering and contact details
Topics: 1 | Posts: 1By Irrigation Australia, 8 months ago
CMIs/DQPs are required to add 10 CPD points every two years and this topic explains the process and method to add points
Topics: 1 | Posts: 1By Irrigation Australia, 8 months ago
A best practice guide for duly qualified persons performing in-situ accuracy testing on non-urban water meters in NSW
Topics: 1 | Posts: 1By Irrigation Australia, 8 months ago
This Guideline for the Use of Tamper Evident Seals on Non-Urban Water Meters (the Guideline) has been developed by Irrigation Australia Limited to provide information for meter validators on appropriate placement of tamper evident seals on non-urban water meters. It is expected that meter validators will comply with the requirements of the Guideline.
Topics: 1 | Posts: 1By Irrigation Australia, 8 months ago
For some non-urban water meters, the National Measurement Institute (NMI) Certificates of Approval (commonly referred to as Pattern Approval Certificates) state that long lengths of upstream or downstream pipe lengths are needed to address ‘Disturbance Types 1, 2 or 3’
Topics: 1 | Posts: 1By Irrigation Australia, 8 months ago
The National Measurement Institute of Australia checks non-urban water meters for compliance with the Australian Standard for Non-Urban water meters (AS4747). If the meter passes testing, it is pattern approved as compliant with the requirements for closed conduit meters (NMI-M10); or with the requirements for open channel meters (NMI-M11); or with the requirements of equivalent overseas standards. A pattern approved meter complies with these requirements within the operating ranges specified by the meter manufacturer.
Topics: 2 | Posts: 2By Irrigation Australia, 5 months ago
The DQP Portal is managed by WaterNSW and is used to submit the Validation Certificate to notify the water user that the meter installation is compliant, submit a Certificate for the design of a new open channel metering equipment after 1 April 2019 that the open channel design is compliant, generate a Report to rely on transitional arrangement to keep existing metering equipment, that the existing meter is compliant. The DQP Portal is maintained and supported by WaterNSW.
Topics: 5 | Posts: 5By Irrigation Australia, 3 months ago
Under NSW’s metering rules, all surface water works, except for pumps below 200mm, need to be fitted with an accurate meter and a compatible local intelligence device (LID). A LID is a device, such as a telemetry-enabled data logger or other telemetry-capable field solution that is able to connect to a water meter and transmit metering data to government via telemetry. Is it worth noting that all other works that are captured by the metering rules need to be fitted with a compatible telemetry-capable data logger (a Local Intelligence Device or ‘LID’). Although all LIDs need to be equipped with the capability to transmit data, via telemetry to the DAS, only water users with surface water works, except pumps less than 200mm, need to utilise this capability. Other water users can choose not to utilise this capability and instead operate the LID as a data logger only.
Topics: 5 | Posts: 7By Irrigation Australia, 3 weeks ago
Certification for Meter Installers and Validators is a national program provided by Irrigation Australia. Certification is a license earned by a person to certify that they are qualified to perform a job. Certification indicates that the individual has a minimum level of knowledge, skills and abilities in the view of the certifying body to perform their job to the satisfaction of industry, regulators and customers. Irrigation Australia has developed Code of Conduct and Complaints Procedure policy documents.
Topics: 2 | Posts: 2By Irrigation Australia, 8 months ago
Click on the relevant jurisdiction from the list below to obtain information on non-urban water metering requirements or post a question. If required Irrigation Australia will contact the appropriate regulator to obtain a response.
Topics: 0 | Posts: 0By Irrigation Australia, 3 days ago
Please email us at info@irrigation.org.au if you would like to be added to the forum and you can then make a post and be notified when new posts are made. Due to the many spam registrations received we have elected to have a manual system to ensure only CSVs/DQPs are members of the forum.
Topics: 0 | Posts: 0
Forum is empty
If the information you require is not listed in the categories below then please ask your question/comment here and Irrigation Australia will find the expert response
Topics: 19 | Posts: 19By Irrigation Australia, 6 months ago
To give water users greater confidence about devices or solutions that have been confirmed as being compliant with the floodplain harvesting measurement rules, the department will maintain a list of devices that have been tested and found to meet the relevant specifications. It is the water user’s responsibility to ensure they purchase a fit-for-purpose device that meets their individual needs.
Topics: 4 | Posts: 4By Irrigation Australia, 7 months ago
Some useful links to Floodplain Harvesting in NSW are here:
Topics: 1 | Posts: 1By Irrigation Australia, 7 months ago
Read the NSW document on establishing survey benchmarks for floodplain harvesting meters in NSW
Topics: 2 | Posts: 2By Irrigation Australia, 7 months ago
Read the frequently asked questions about Floodplain Harvesting
Topics: 1 | Posts: 1By Irrigation Australia, 8 months ago
Interested in becoming qualified to install and validate storage meter devices in NSW, then follow these three steps:
Topics: 0 | Posts: 0By Irrigation Australia, 8 months ago
Read the Irrigation Australia CSV Code of Conduct & Complaints Procedure
Topics: 0 | Posts: 0By Irrigation Australia, 8 months ago
The Floodplain Harvesting Measurement Policy sets out the objectives, methods and rules for floodplain harvesting measurement in the northern Murray–Darling Basin. The policy aims to ensure a fair share of water for all: Aboriginal and First Nations peoples, irrigated and non-irrigated agricultural producers; downstream users and communities; the environment; and river systems throughout the Murray-Darling Basin.
Topics: 1 | Posts: 1By Irrigation Australia, 8 months ago
Latest Post: I need a meter, what now? - NSW metering rules Our newest member: sapphireirrig@gmail.com Recent Posts Unread Posts
